Quantity Estimator Calculator

Turf Calculation Guidelines:

• It is recommended to factor in up to 5% additional material to account for wastage. Calculations are rounded up to the nearest whole unit.

General Disclaimer:

• The accuracy of calculated quantities is dependent on the information provided by the user.
• Please ensure measurements are entered using the correct units.
• Results are rounded upwards.
• This calculation tool is not optimised for very small areas. Results below 0.01 units may be unreliable due to rounding.

Bulk Material Disclaimer:

• Material densities can fluctuate; therefore, calculated quantities are estimations only.
• Precise quantity calculations are uncommon. Users should consider whether it is preferable to have surplus or a deficit.
• Consider potential uses for leftover materials and disposal methods for excess.
• Be aware that ordering additional materials to compensate for a shortfall may incur a second delivery fee. This should be weighed against the potential for having excessive material.

Turf and Paving Material Disclaimer:

• Turf: It is advisable to allow a minimum of 5% extra material to accommodate wastage, which can vary depending on the packing density of the rolls.
• Paving: Paving material quantities may vary when cutting is required. When utilising larger paving units, consider whether the area’s dimensions are multiples of the paving unit size.
  • Example: For 400mm x 400mm paving units covering a 2.5m x 1.1m area, adjusting the area to 2.4m x 1.2m (multiples of 0.4m) would require 18 units.
  • If adjustment is not possible, allow for wastage due to cutting.